Buy one Cryo Facial Stick and get a 2nd for £10. Use the code FRIENDS FOREVER at the check out

skin rejuvenation

Bondi Body Laser@Home is dual functionality device - Permenant Hair Reduction & Skin Rejuvenation

Benefits Of Skin Rejuvenation:

  • Reduces pigmentation and sun spots
  • Reduces surface level Oxyhemoglobin in blood vessels, better known as broken capillaries
  • Reduces rosacea and troubled skin
  • Evens out skin tone

Prepare The Skin:

  • Skin needs to be clean and dry
  • No moisturiser, no fake tan, no deodorant, no perfume, no body oils

Let's Get Started:

  • Turn the device on by pressing the white power button for 3/4 seconds
  • Choose between automatic and manual settings. To change between settings, hold down the black button below the display screen.
    We recommend the automatic setting. Device will flash every 3/4 seconds.
  • Choose the intensity setting. 1 is the lowest, 8 is the highest. To move between intensity settings, press the white power button quickly. We recommend starting on setting 2/3. Then move increase or decrease as desired.
  • Put on the safety glasses provided
  • Press the output window firmly against the skin
  • Move the device 1cm by 1cm in the area are treated
  • Expect to feel a warm sensation
  • It does not matter to go over the same area twice
  • If experiencing pain, stop using the device or reduce the intensity setting

Post-treatment:

  • No hot showers/baths for the next 3 days
  • No make up for 12 hours
  • Wash your face with warm water for the next 3 days
  • No facials for 7 days
  • Do not wax, use hair removal cream for 7 days
  • Do not use scented moisturiser or non-scented sunscreen
  • Do not go into direct sunlight for extended periods
  • Do not lay in the sun or use sun-beds
  • Do not shave within 48 hours.

Have more question? Go to FAQs Skin Rejuvenation or email us at info@bondy-body.com

Buy Now

Bondi Laser @ Home is an all-over body dual functionality device concentrating on skin health & permeant hair reduction.

IPL evens out skin tone by blurring hyperpigmentation, sun spots, and oxyhemoglobin in blood vessels (surface level broken capillaries). Reduces Rosacea, trouble skin for those who have PCOS and Pseudofolliculitis barbae, where the hair curls up under the skin and leads to rash-like bumps.

Let’s get you started:

Skin Preparation
The skin needs to be clean & dry.
No makeup, no deodorant, no moisturise, no fake tan, no perfume, remove any jewellery.

How to use:

Turn the device on by pressing the white power button for 3/4 seconds.
Change from Manual to Automatic by holding down the black button below the display screen for 3/4 seconds.
Select the intensity setting.
1 is the lowest (7.82 J/cm) – 8 is the highest (15.31J/cm).
We recommend choosing a lower setting and increasing as needs be.
Put on the safety glasses provided.
Press the output window firmly to the skin, moving around in small increments.
It doesn’t matter if you go over the same area twice or overlap.

Post Treatment:

You may experience redness to the area or slight tingling.
Apply a light, unscented moisturiser or Serum.
Do not go into direct sunlight.
Do not use sunbeds.

Usage:

Face – weekly for 12 weeks
Rest of body – twice weekly for 12 weeks.
Do not use if you are going into the sun or are using sunbeds.

Common Reactions:

Face – weekly for 12 weeks
Rest of body – twice weekly for 12 weeks.
Do not use if you are going into the sun or are using sunbeds.

Skin Rejuvenation:

IPL reduces pigmentation, sun spots, oxyhemoglobin in blood vessels, better known as broken capillaries & in more sever cases Rocacea.

Many people associate IPL with just hair permanent hair reduction. IPL reduces pigmentation, sun spots, and oxyhemoglobin in blood vessels – better known as broken capillaries and Rosacea in more severe cases. Even outs skin tones. Reduces trouble skin for those who have PCOS.

Getting Started:

Make sure you skin is clean & dry. So to be clear: no make up, no deodorant, no moisturise, no fake tan (if using on the face).

For the Face:

If this is the first time you are using your Bondi Laser & Home for Skin Rejuvenation. Start on setting 1 it is the lowest setting – 7.81J/cm.
Turn the device on.
I always like to use the automatic setting, hold down the black button below the display screen for  3/4 second.
Put on the sunglasses provided.
Place the Lightbox firmly against the skin, wait for the flash, then move 1cm * 1cm around the area you are treating.
Increase the intensity setting
Use weekly.

Rest of the Body:

We suggest you start on setting 4.
Turn the device on.
I always like to use the automatic setting, hold down the black button below the display screen for  3/4 second.
Put on the sunglasses provided.
Place the Lightbox firmly against the skin, wait for the flash, then move 1cm * 1cm around the area you are treating.
Increase the intensity setting as
Use up to twice a week.